ATT-1 – Quad attenuverter – Kit

42,00

A Quad attenuverter in one module.

In stock

SKU: ATT-1-K Category: Tags: ,

Description

Why have a single attenuverter in your system when you can have 4? An attenuverter lets you attenuate and invert any signal. A very useful module to have a few of in any system.

This item contains the front-plate and PCB, as well as all the necessary components to complete the build and have a functional module. It requires you to be familiar with a soldering iron and basic knowledge identifying and orientating electrical components. It’s not a very complicated project so ideal if  you are starting out DIYing.

What you’ll be needing to build this successfully:

  • A soldering iron
  • Some solder
  • Wire cutters
  • A multimeter isn’t necessary but can be handy to verify resistor values.
  • An oscilloscope isn’t necessary, but can be handy to check your build.
  • An Eurorack compatible power supply (+12v/-12v)

You can find the BOM (Bill of Materials) here.

More info on the module can be found here.

Special remark on the build: You should connect the power header to the back of the PCB.

Additional information

width

8HP

depth

35mm including power header.

You may also like…