This one is a re-build of one of my first ‘designs’, if you can call them that way. Nevertheless, It’s a percussive module designed for all kinds of metallic sounds; cymbals, hihats, gong, bells, plate hits, cowbells, trash cans, … you name it. Since I’ve build the first one I’ve been using it in every song since. It’s actually a very useful and versatile percussion module. At that time however I didn’t really had the habit of writing down schematics, I just soldered things together until it worked. Yet I wanted to revisit this module again because I could use a second one and I also wanted to iron out some of the quirks my initial build had as well as add a few features I regret not having on the first module. So I kinda started over, this time taking notes though.
It was totally unintentional, but in the mess of old broken gear I stumbled upon the remains of my very first guitar amp. It was a Hohner SP55 I bought 2nd hand somewhere in the 90ties. A pretty unremarkable transistor based amp which never really tickled my pickle so to say, and on a day I fried the output amp and it ended on the pile of discarded gear. It had a useful reverb though so I scavenge the springs out of this thing and see if I could make myself a nice spring reverb for use in the studio and/or modular.
I’m slowly working towards a project, it’s still not ready to be disclosed though, but it needed a dual rail power supply. I’ve always bought Doepfer DIY kits for my Eurorack needs, but I needed a +14V/-14V for this project. Since I could use an extra +12V/-12V supply as well for future Eurorack work, I decided to build a power supply with variable voltage regulators so it could handle both.
I found myself short of an ADSR in my system and it annoyed me to no end I hadn’t thought of buying a few more. Instead of hitting the favourite Eurorack module dealer for my fix I went googling to see if I could cook up one of my own. Couldn’t be that difficult. Right. Turns out, there are tons of useful ADSR schematics floating around on the internet. Continue reading “ADSR-1”
This is an envelop follower. Since I build an input module I kinda wished I had one of these so I made it a little project, fun for the whole family well, not really, but anyways..) Continue reading “Envelop Follower – Follow Moe”