Our shop is now open for business. All kinds of awesome products can be purchased, so dig up your wallet! You can visit our shop here. If you have any remarks send a shout to info@skullandcircuits.com and I’ll get back to you as soon as possible.Continue Reading

According to wikipedia, A Phaser is a “an electronic sound processor used to filter a signal by creating a series of peaks and troughs in the frequency spectrum. The position of the peaks and troughs of the waveform being affected is typically modulated so that they vary over time, creating a sweeping effect. For this purpose,Continue Reading

You cannot build a modular without any mixer modules. I’ve made quite a few mixer modules by now and I noticed I hadn’t put anything up online. So, I’m rectifying this oversight with this post.Continue Reading

I’ll be hosting a DIY workshop at the Pulse Modular Music Fest where you can build the VCF-1 from kit. Entrance for the event is 10€, the workshop is an extra 25€, which includes the kit (PCB, Front panel and all components) So if you’re in the area, don’t hesitateContinue Reading

I’ve been asked if I could do a workshop about synth building. While there are no solid plans to do so yet, I was thinking about what to build during such a workshop. It would be cool to have something to take home you’ve build yourself during the workshop, andContinue Reading

This one is a re-build of one of my first ‘designs’, if you can call them that way. Nevertheless, It’s a percussive module designed for all kinds of metallic sounds; cymbals, hihats, gong, bells, plate hits, cowbells, trash cans, … you name it. Since I’ve build the first one I’veContinue Reading

It was totally unintentional, but in the mess of old broken gear I stumbled upon the remains of my very first guitar amp. It was a Hohner SP55 I bought 2nd hand somewhere in the 90ties. A pretty unremarkable transistor based amp which never really tickled my pickle so toContinue Reading

I’m slowly working towards a project, it’s still not ready to be disclosed though, but it needed a dual rail power supply. I’ve always bought Doepfer DIY kits for my Eurorack needs, but I needed a +14V/-14V for this project. Since I could use an extra +12V/-12V supply as wellContinue Reading

I found myself short of an ADSR in my system and it annoyed me to no end I hadn’t thought of buying a few more. Instead of hitting the favourite Eurorack module dealer for my fix I went googling to see if I could cook up one of my own.Continue Reading

A very boring yet crucial part of any setup. A buffered multi always comes in handy and it’s pretty easy to build as well. Since I was building one myself I added a few leds to indicate signal and it’s polarity, that way I got some indication what’s going on.Continue Reading

It shouldn’t be all weird stuff, sometimes one needs some simple building blocks. After a bit of experimenting with sending audio from the mixing desk to the modular I found myself short of a way to amplify a line level signal to the audio levels used in a modular. Hence,Continue Reading

I’ve put some updated schematics for the oscillator one online.  Changelog: Changed Linear Ramp output volume so it’s in line with the other ones (R59 to 20k instead of 10k) Changed the sensitivity of the coarse and fine knobs (R10 and R11) Used an LM4040 to create a 5V referenceContinue Reading

I was one of those guitarists who spend more time with his effect pedals, then with his guitar. I ended up exchanging my guitar for synths when it came to music making. Not really a surprise there, but my love of piling effects together into a huge unpredictable pile isContinue Reading